next up previous contents index
Next: .save Line Up: WRspice Input Format Previous: .tran Line   Contents   Index

Output Generation

In these lines, outputs can be specified using the SPICE2 notation. The form is vxx(node1[,node2]), or ixx(branch_device). The xx can be left out, indicating the basic voltage or current, or be one of the following.

m Magnitude
p Phase
r Real part
i Imaginary part
db Decibel value ( 20log10 )
These forms are not usually needed for other than ac analysis. The (node1, node2) notation indicates a voltage difference between nodes node1 and node2. If node2 and the associated comma are left out, the ground node is assumed. Output variables for noise, distortion, and some other analyses have a different general form. See the description of the analysis for the output variable names.


Stephen R. Whiteley 2017-03-28