next up previous contents index
Next: The wire Button: Create/Edit Up: The Side Menu: Geometry Previous: The symbl Button: Symbolic   Contents   Index

The terms Button: Show Subcircuit Connections


When the terms button is active, the electrical connection points of the subcircuits are shown. These points are placed with the subct command. The terms button is available in electrical mode only. When active, the physical terminals will be shown in physical mode windows, as if the All Terminals check box in the Setup page of the Extraction Setup panel was checked. This panel is obtained from the Setup button in the Extract Menu. Similarly, in physical mode, when physical terminals are visible, electrical terminals will also be visible in electrical windows, as if the terms button was active.

Stephen R. Whiteley 2017-03-22