Several thing needs to be added to the config.c under
$(SPICE)/src/bin so that SPICE can recognise the new 
model. Here attaches the file.  Thing needs to be added 
can be found by searching "Jiannong" in the file.

If your version of BSPICE does not have any additional 
device from the original version of BSPICE, you can just 
replace the file by the new one attached.

To compile the new model with BSPICE3e2, the .h files with 
the new model have to be copied into 'include' directory 
of SPICE.


by Jiannong Feng 4/1/1999


-------------------------- Config.c ----------------------------
/**********
Copyright 1999 Regents of the University of California.  All rights reserved.
**********/

#include "spice.h"

#ifdef DEVICES_USED
static char *devs = DEVICES_USED;
#endif
#ifdef ANALYSES_USED
static char *ans = ANALYSES_USED;
#endif

#define CONFIG

#include <stdio.h>
#include "noisedef.h"
#include "devdefs.h"
#include "suffix.h"

#include "asrcitf.h"
#include "bjtitf.h"
#include "capitf.h"
#include "cccsitf.h"
#include "ccvsitf.h"
#include "cswitf.h"
#include "dioitf.h"
#include "inditf.h"
#include "isrcitf.h"
#include "mos1itf.h"
#include "mos6itf.h"
#include "resitf.h"
#include "switf.h"
#include "vccsitf.h"
#include "vcvsitf.h"
#include "vsrcitf.h"

#include "bsim1itf.h"
#include "bsim2itf.h"
#include "bsim3itf.h"         /* Added by Jianhui 8/19/91 */
#include "b3soiitf.h"         /* Added by Jiannong 3/31/1999 */
#include "mos2itf.h"
#include "mos3itf.h"
#include "jfetitf.h"
#include "mesitf.h"
#include "ltraitf.h"
#include "traitf.h"
#include "urcitf.h"

#ifndef AN_dc

#ifdef AN_ac
#define AN_dc
#endif
#ifdef AN_pz
#define AN_dc
#endif
#ifdef AN_tran
#define AN_dc
#endif
#ifdef AN_noise
#define AN_dc
#endif
#ifdef AN_disto
#define AN_dc
#endif
#ifdef AN_sense
#define AN_dc
#endif

#endif

extern SPICEanalysis OPTinfo;
extern SPICEanalysis ACinfo;
extern SPICEanalysis DCTinfo;
extern SPICEanalysis DCOinfo;
extern SPICEanalysis TRANinfo;
extern SPICEanalysis PZinfo;
extern SPICEanalysis SENinfo;
extern SPICEanalysis TFinfo;
extern SPICEanalysis DISTOinfo;
extern SPICEanalysis NOISEinfo;

SPICEanalysis *analInfo[] = {
    &OPTinfo,
#ifdef AN_ac
    &ACinfo,
#endif
#ifdef AN_dc
    &DCTinfo,
#endif
#ifdef AN_op
    &DCOinfo,
#endif
#ifdef AN_tran
    &TRANinfo,
#endif
#ifdef AN_pz
    &PZinfo,
#endif
#ifdef AN_sense
    &SENinfo,
#endif
#ifdef AN_tf
    &TFinfo,
#endif
#ifdef AN_disto
    &DISTOinfo,
#endif
#ifdef AN_noise
    &NOISEinfo,
#endif
};

int ANALmaxnum = sizeof(analInfo)/sizeof(SPICEanalysis*);
SPICEdev *DEVices[] = {

#ifdef DEV_asrc
        &ASRCinfo,
#endif
#ifdef DEV_bjt
        &BJTinfo,
#endif
#ifdef DEV_bsim1
        &BSIM1info,
#endif
#ifdef DEV_bsim2
        &BSIM2info,
#endif
#ifdef DEV_bsim3               /* added by Jianhui 8/13/91 */
        &BSIM3info,
#endif
#ifdef DEV_b3soi               /* Added by Jiannong 3/3/1999 */
        &B3SOIinfo,
#endif
#ifdef DEV_cap
        &CAPinfo,
#endif
#ifdef DEV_cccs
        &CCCSinfo,
#endif
#ifdef DEV_ccvs
        &CCVSinfo,
#endif
#ifdef DEV_csw
        &CSWinfo,
#endif
#ifdef DEV_dio
        &DIOinfo,
#endif
#ifdef DEV_ind
        &INDinfo,
        &MUTinfo,
#endif
#ifdef DEV_isrc
        &ISRCinfo,
#endif
#ifdef DEV_jfet
        &JFETinfo,
#endif
#ifdef DEV_ltra
        &LTRAinfo,
#endif
#ifdef DEV_mes
        &MESinfo,
#endif
#ifdef DEV_mos1
        &MOS1info,
#endif
#ifdef DEV_mos2
        &MOS2info,
#endif
#ifdef DEV_mos3
        &MOS3info,
#endif
#ifdef DEV_mos6
        &MOS6info,
#endif
#ifdef DEV_res
        &RESinfo,
#endif
#ifdef DEV_sw
        &SWinfo,
#endif
#ifdef DEV_tra
        &TRAinfo,
#endif
#ifdef DEV_urc
        &URCinfo,
#endif
#ifdef DEV_vccs
        &VCCSinfo,
#endif
#ifdef DEV_vcvs
        &VCVSinfo,
#endif
#ifdef DEV_vsrc
        &VSRCinfo,
#endif
};

/* my internal global constant for number of device types */
int DEVmaxnum = sizeof(DEVices)/sizeof(SPICEdev *);
/* XXX Should be -1 ? There is always an extra null element at the end ? */
static char * specSigList[] = {
    "time"
};

static IFparm nodeParms[] = {
    IP( "nodeset",PARM_NS ,IF_REAL,"suggested initial voltage"),
    IP( "ic",PARM_IC ,IF_REAL,"initial voltage"),
    IP( "type",PARM_NODETYPE ,IF_INTEGER,"output type of equation")
};

IFsimulator SIMinfo = {
    "Spice",        /* name */
    "Spice3 circuit level simulation program",  /* more about me */
    Spice_Version,          /* version */

    CKTinit,        /* newCircuit function */
    CKTdestroy,     /* deleteCircuit function */

    CKTnewNode,     /* newNode function */
    CKTground,      /* groundNode function */
    CKTbindNode,    /* bindNode function */
    CKTfndNode,     /* findNode function */
    CKTinst2Node,   /* instToNode function */
    CKTsetNodPm,    /* setNodeParm function */
    CKTaskNodQst,   /* askNodeQuest function */
    CKTdltNod,      /* deleteNode function */

    CKTcrtElt,      /* newInstance function */
    CKTparam,       /* setInstanceParm function */
    CKTask,         /* askInstanceQuest function */
    CKTfndDev,      /* findInstance funciton */
    CKTdltInst,     /* deleteInstance function */

    CKTmodCrt,      /* newModel function */
    CKTmodParam,    /* setModelParm function */
    CKTmodAsk,      /* askModelQuest function */
    CKTfndMod,      /* findModel function */
    CKTdltMod,      /* deleteModel function */

    CKTnewTask,     /* newTask function */
    CKTnewAnal,     /* newAnalysis function */
    CKTsetAnalPm,   /* setAnalysisParm function */
    CKTaskAnalQ,    /* askAnalysisQuest function */
    CKTfndAnal,     /* findAnalysis function */
    CKTfndTask,     /* findTask function */
    CKTdelTask,     /* deleteTask function */

    CKTdoJob,       /* doAnalyses function */
    CKTtrouble,	    /* non-convergence message function */

    sizeof(DEVices)/sizeof(SPICEdev *),
    (IFdevice**)DEVices,

    sizeof(analInfo)/sizeof(SPICEanalysis *),
    (IFanalysis **)analInfo,

    sizeof(nodeParms)/sizeof(IFparm),
    nodeParms,

    sizeof(specSigList)/sizeof(char *),
    specSigList,

};