next up previous contents index
Next: Impact Ionization Up: HSPICE MOS Level 49 Previous: MOS Diode Model Parameters   Contents   Index

Capacitance Parameters

CAPOP
Do not use CAPOP for WRspice. CAPMOD is included in the BSIM3 model. CAPOP is HSPICE specific, and not included in the BSIM3 parameter set. The default BSIM3 capacitance model is CAPMOD=3.
CJM
This is taken as an alias for the BSIM3 CJ parameter in WRspice.
MJ0
This is taken as an alias for the BSIM3 MJ parameter in WRspice.
PJ
This is taken as an alias for the BSIM3 PB parameter in WRspice.
CTA, CTP
In HSPICE these are the ``junction capacitance CJ temp. coeff.'' and ``junction sidewall capacitance CJSW temp. coeff'', used with TLEVC=1. There are no WRspice equivalents.
PTA, PTP
In HSPICE these are the ``junction potential PB temp. coeff.'' and ``fermi potential PHI temp. coeff'', used with TLEVC=1 or 2. There are no WRspice equivalents.
PHP
This is taken as an alias for the BSIM3 PBSW parameter in WRspice
TLEV, TLEVC
In HSPICE this is the ``temperature equation level selector'' and ``temperature equation level selector for junction capacitances and potentials''. Do not use these parameters for WRspice.


next up previous contents index
Next: Impact Ionization Up: HSPICE MOS Level 49 Previous: MOS Diode Model Parameters   Contents   Index
Stephen R. Whiteley 2018-07-21