next up previous contents index
Next: Length and Width Up: HSPICE MOS Level 49 Previous: HSPICE MOS Level 49   Contents   Index

General parameters

BINFLAG
This is not used for WRspice.
SCALM, SCALE
In HSPICE these are the ``model scaling factor'' and ``element scaling factor''. There are no WRspice equivalents.
TREF
Temperature at which parameters are extracted. This is taken as an alias for the BSIM3 TNOM parameter in WRspice.
NQSMOD
This is accepted by WRspice as an extension to BSIM3, and serves as the default for devices that use the model. If also given on the device line, that value will override.



Stephen R. Whiteley 2019-06-03